PRODUCT DESCRIPTION & USE

Polyester (oil) based decorative-looking, thin and thick texture that can be applied, provider water impermeable and a protective coating material. Concrete bricks, bricks, asbestos cement, steel, aluminum surfaces, ceramic tile, wood chipboard, gas concrete etc, painted and plastered on every available surface  can be applied easily all temperature

 

KEY BENEFITS

• Breathing capability and covering power  high,
• Abrasion-resistant, 
• No cracking and shedding, 
• Easy to implement,
• Decorative coating

 

AVAILABLE IN SIZES

In 20 tin buckets

 

COLOUR & GLOSS RANGE

Various colour options, matt

    

FLASH POINT

This product has a flashpoint of 45ºC

 

VOC CONTENT

Available on request

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder: Alkyd resin

Solvent: White spirit

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids

Specific Gravity   1.6 kg/L

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed

 

APPLICATION

After prepared ground the application surface primed with Southwind Synthetic Primer. Implementation of various colors and wide facade applications using band to prevents color problem. Approaching with ignition is dangerous. Products according to the desired pattern, is applied with roll or custom compressor.

 

SPREADING RATE

Depending on type of surface 0,800-1,200 kg/m2

 

REDUCTION

According to the season for 30-40 % by gun, 20-30% by roll when applied should be thinned with Southwind Solvent Thinner.

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry  At 20 °C, 2 hours

Full Dry 8 hours

This is dependent upon temperature and humidity. 

 

CLEANING UP

Clean up with thinner. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of tin buckets should be in accordance with local authority guidelines.

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

FOLLOW US ON

Phone: +90 530 429 9233