PRODUCT DESCRIPTION & USE

It has high performance and low thermal conductivity values. By NASA space shuttle program has been developed within the framework includes ceramic microspheres. The elastomeric resin based interior and exterior is a special coating that provides heat and water insulation. Areas of use: Applied to the surfaces of the construction elements such as cement coat, gypsum coat, plasterboard, ytong, brick, etc.

 

KEY BENEFITS

• Depending on the number of applications to the wall of the building heating and cooling energy costs 40% in energy savings rates are up. Special vacuum ceramic microspheres doped Southwind  thermal paint interior wall and ceiling paint the inside is used as the radiant heat is still reflects inside, radiant heat that is coming with the sun’s rays when used in exterior also reflect outside.

 

AVAILABLE IN SIZES

 Main   In 3.5 kg, 10 kg, 20 kg, 25 kg plastic buckets

 

COLOUR & FLOSS RANGE

Matt appearance

 

FLASH POINT

Flash point of this product is 39 degrees Celsius. 

 

VOC CONTENT

Available upon request

 

COMPOSITION (NOMINAL)

Pigment: Lightfast pigment

Binder: Acrylic binder

Solvent: Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids % 70 ± 2

Specific Gravity 1.6 ± 0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed.

 

APPLICATION

To apply paint to the surface dirt, oil, rust etc. all kinds of impurities must be removed from to the surface. Stir well before use. 3 coats should be applied by roller or brush without thinning. Paint must dry completely between coats.

 

SPREADING RATE

400-500 gr/m2 or 250-350 ml/m2 in the double layer      depending   on the surface’s situation.

 

REDUCTION

Do not reduce this product

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

1-2 hours depending on the ambient temperature and humidity

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of can in accordance with local authority guidelines.

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally. If medical advice is needed, have product container or label at hand. Dispose of contents to a waste disposal facility in accordance with local/national regulations. Safety data sheet available on request.

 

STORAGE

Min. 1 year in its package, protecting from freezing. 

FOLLOW US ON

Phone: +90 530 429 9233