PRODUCT DESCRIPTION & USE

Southwind Styrene Acrylic Copolymer Based Textured Exterior Coating material, used for decorative and protective purposes. Applied to all surfaces of the construction elements such all plasters smoothly processed coarse plaster, concrete, etc.

 

KEY BENEFITS

• Protects from rain, frost, snow and sunshine
• Protects from rain, frost, snow and sunshine, will not peel or flake
• Quick drying, low odor and VOC
• Shower proof in one hour

 

AVAILABLE IN SIZES

   In the 10 kg, 20 kg, 25 kg plastic buckets

 

COLOUR & GLOSS RANGE

 Various colour options, matt

 

FLASH POINT

Not applicable since this product is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder:    Acrylic binder

Solvent:  Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 75 ± 2 %

Specific Gravity 1.75 ±0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

If the large pattern is desired, then the material is not thinned; but the fine is desired, then it is applied in a single layer by the roll by thinned with the 10-15% water, after making it as the homogenous application degree. The different patterns may be obtained depending on the used roll type.

 

SPREADING RATE

800 -1,200 gr/m2 depending on the surface situation or thread thickness.

 

REDUCTION

10-15 % water may be added depending on the   temperature

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

      Touch Dry At 20 °C, 4-5hours

      Recoat 4 hours

      This is dependent upon temperature and humidity. 

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets should be in accordance with local authority guidelines.

                                

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

FOLLOW US ON

Phone: +90 530 429 9233