PRODUCT DESCRIPTION & USE

PVA emulsion based, effaceable satin matt last layer interior silicon additive. Applied to the surfaces of the construction elements such as cement coat, gypsum coat, plasterboard, gas concrete, brick, etc…

 

KEY BENEFITS

• Well adhesion to the surface,
• Higher coating, 
• Washable, 
• No fading or cracking.

 

AVAILABLE IN SIZES

In 3.5 kg, 10 kg, 20 kg, 25 kg plastic buckets

 

COLOUR & GLOSS RANGE

Various colour options, matt 

 

FLASH POINT

Not applicable since it’s a non-flammable product

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 60±2%

Specific Gravity 1.5±0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

Southwind Silicon Based Interior Paint is applied in two layers. 2 hours should be allowed between the layers. It is applied easily by fell roll or brush. It is recommended that it shall be applied between +5°C and 30°C.

 

SPREADING RATE

 150-200 gr/m2 or 100-135 ml/m2 for double layer application, 

depending on the surface condition 

 

REDUCTION

Thinned with 15-20% water depending on the application surface.

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry: At the 20 °C  1/2 hours

Recoat: 4hours

This is dependent upon temperature and humidity. 

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose the bucket in accordance with local authority guidelines.

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Phone: +90 530 429 9233