Interior Paste
Ağustos 11, 2025
Silicon Based Exterior Primer
Ağustos 11, 2025

Isolaque Primer

Acrylic copolymer based transparent wall coat for the gypsum and absorbent surfaces. Applied to the construction elements such as plaster concrete, gypsum, limestone, etc

PRODUCT DESCRIPTION & USE

Acrylic copolymer based transparent wall coat for the gypsum and absorbent surfaces. Applied to the construction elements such as plaster concrete, gypsum, limestone, etc

 

KEY BENEFITS

  • Protects from rain, frost, snow and sunshine
  • Protects from rain, frost, snow and sunshine, will not peel or flake
  • Quick drying, low odor and VOC
  • Shower proof in one hour

 

AVAILABLE IN SIZES

In 3.5 kg, 7.5 kg, 10 kg, 15 kg plastic buckets

 

COLOUR & GLOSS RANGE

Transparent, colourless

 

FLASH POINT

Not applicable since this product is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 25 ± 2 %

Specific Gravity 1 ± 0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

Southwind Isolacque Primer is applied to the surface, penetrating it very well by thinned by 5-7 % with water. The last layer dye must be applied minimum after 6 hours

 

SPREADING RATE

 0.02-0.03 kg/m2 depending on the surface’s situation

 

REDUCTION

5-7 % water may be added

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry At 20 °C  1/2 hours

Recoat 4 hours

This is dependent upon temperature and humidity

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets should be in accordance with local authority guidelines.

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

FOLLOW US ON

Phone: +90 530 429 9233