PRODUCT DESCRIPTION & USE

  Water based, acrylic resin based, rapidly filling on       cracked surfaces, interior and exterior surfaces. Can be used on any surface ; betopan, gypsum board, chipboard, wood, iron, plaster, exposed concrete etc.

 

KEY BENEFITS

• High filling power
• Easy applicability
• Fast and easy filling of cracked surfaces.
• After drying, there will be no collapse (volume loss), shrinkage and cracking.

 

AVAILABLE IN SIZES

In the 1 lt , 5lt, 10 lt plastic buckets.

 

COLOUR & GLOSS RANGE

 Matt. White or the colors which are proper for the application layer.

 

FLASH POINT

Not applicable since this product is non-flammable.

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment:   Lightfast pigment

Binder:      Acrylic binder

Solvent:    Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 63± 2 % 

Specific Gravity 0,40 (g/cm³)

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

 On walls containing more than 5% moisture and on old painted unstable surfaces, the application should be made after the surface is cleaned and improved first. The surface to be applied should be clean and dry, oily, dusty and dirty surfaces should be cleaned first.The product is ready to use. 5% water can be added according to the condition of the surface. The application should be done at a temperature between 5 and 30 degrees. After a day, if necessary, it is sanded with fines and paper to make corrections.

 

SPREADING RATE

Depending on the absorbency of the surface and surface roughness the single layer 1.0 to 1.2 kg/m2

 

REDUCTION

Maximum 5% with water

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Drying in 2-3 hours depending on the ambient temperature and humidity

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets should be in accordance with local authority guidelines.

                          

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Phone: +90 530 429 9233