PRODUCT DESCRIPTION & USE

 Solvent-based, is a very strong paint remover.

Areas of use: Be used on surface wall, wood, concrete, iron, steel, gypsum coat, plasterboard. 

 

KEY BENEFITS

• for cleaning the surface of the solvent and water-based paint. On plaster and drywall surfaces should be considered when applications, repair  must be carried out if necessary after the cleaning surface.

 

AVAILABLE IN SIZES

0.5 kg, 1 kg, 3.5 kg, 10 kg, 20 kg tin buckets.

 

COLOUR & GLOSS RANGE

Transparent

 

FLASH POINT

Flash point of this product is  less than 20 degrees Celsius. 

 

VOC CONTENT

Available upon request

 

COMPOSITION (NOMINAL)

Pigment:   Not applicable

Binder:    Not applicable

Solvent:   Not applicable

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids % 90

Specific Gravity 1.7 ±0.05 kg/L   (@ 20 °C)

               

PHYSICAL CHARACTERISTICS 

Compressive  strength: 650 kg/cm²,

Tensile strength:250 kg/cm², 

Concrete adherence (adhesion): 40-50 kg/cm²,

Elasticity Module: 55.000kg/cm².

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed.

 

APPLICATION

Is applied with a brush on the surface to be cleaned. 5-7 minutes should be expected. Intumescent paint at the surface is removed with spatula. Surface must be thoroughly cleaned before re-painting. Placing each floor separately is required for multi-storey painted surfaces. Apply between + 5 ° C to + 30 ° C.Note: A small sample must be applied before application of different surface treatments. Responsibility for damages that may occur will be borne by the consumer. Ready of use,not thinning.  

 

 

SPREADING RATE

Depending on the nature of the surface single layer of 4-5 m2 / L. Controlled sample work should be carried out for precise consumption.

 

REDUCTION

Do not reduce this product

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Drying Time : 20 ° C in 48 hours can be opened to light  traffic. 7 days for normal traffic should be expected.

 

MIXTURE LIFE

At 20°C, 30 minutes (The higher the temperature, the  shorter the life of a mixture)             

  

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of can in accordance with local authority guidelines.

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally. If medical advice is needed, have product container or label at hand. Dispose of contents to a waste disposal facility in accordance with local/national regulations. Safety data sheet available on request.

 

STORAGE

Min. 1 year  in it’s  original package.

FOLLOW US ON

Phone: +90 530 429 9233