Water Based Satin Paint
Ağustos 11, 2025
Crust Plaster
Ağustos 11, 2025

Acrylic Exterior Paint

Acrylic copolymer emulsion based mat exterior paint. Applied to the surfaces of the construction elements such as coat, concrete, brick, gas concrete, etc

PRODUCT DESCRIPTION & USE

Acrylic copolymer emulsion based mat exterior paint. Applied to the surfaces of the construction elements such as coat, concrete, brick, gas concrete, etc

 

KEY BENEFITS

  • Has higher alkali resistance and excellent adhesion to the surface, 
  • Extremely durable against the sunlight, rain, moist and salty moist in the sea coasts, 
  • Allows releasing the moist out by higher water vapor permeability as well as by hydrophobic characteristics

 

AVAILABLE IN SIZES

  In the 3.5 kg, 10 kg, 20 kg, 25 kg plastic buckets

 

COLOUR & GLOSS RANGE

Various colour options, matt

 

FLASH POINT

Not applicable since this product is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment:  Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 70 ± 2 %

Specific Gravity 1.6 ± 0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

After Southwind Acrylic Primer is applied Southwind Acrylic Exterior Paint should be applied in two layers. 2 hours should be allowed between the layers. It is applied easily by fell roll or a brush by thinned with the 25-30% water depending on the application surface. It is recommended that it shall be applied between +5°C and 30°C.

 

SPREADING RATE

400-500 gr/m2 or 250-310 ml/m2 for double layer 

application, depending on the surface condition.

 

REDUCTION

  25-30 % water may be added depending on the surface 

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

  Touch Dry      30 minutes

  Recoating      4 hours       

   The above values depend upon temperature and humidity

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets should be in accordance with local authority guidelines.   

                    

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Phone: +90 530 429 9233