Silicon Based Interior Paint
Ağustos 11, 2025
Spray Paint (Repel Paint)
Ağustos 11, 2025

Silicon Based Interior Semi-Gloss Paint

Top coat matt interior paint, based on PVA emulsion. Applied to the surfaces of the construction elements such as cement coat, gypsum coat, plasterboard, gas concrete, brick, etc…

PRODUCT DESCRIPTION & USE

Top coat matt interior paint, based on PVA emulsion. Applied to the surfaces of the construction elements such as cement coat, gypsum coat, plasterboard, gas concrete, brick, etc…

 

KEY BENEFITS

  • Well adhesion to the surface,
  • Resistant against friction and wash,
  • Not crack or fall,
  • Allows the wall to breathe, 
  • Easy application.

 

AVAILABLE IN SIZES

In 3.5 kg, 10 kg, 20 kg, 25 kg plastic buckets.

 

COLOUR & GLOSS RANGE

Various colour options, matt

 

FLASH POINT

Not Applicable to this product since it is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids       65 ± 2 %

Specific Gravity       1.6 ± 0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

SouthWind luxury plastic paint is applied in two layers. 2 hours should be allowed between the layers. It is applied easily by fell roll or brushes. It is recommended that it shall be applied between +5°C and 30°C.

 

SPREADING RATE

150-200 gr/m2 (or 100-135 ml/m2) for double layer application depending on the surface condition.

 

REDUCTION

Thinned with 25-30% water depending on the application surface

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry: 1hour

Recoat: 4hours

This is dependent upon temperature and humidity. 

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose the bucket in accordance with local authority guidelines   

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Phone: +90 530 429 9233